Knife / Screwdriver Combo
Electrician’s Pocket Knife combines
three everyday tools in one regu-lar-sized handle. Durable knife strips
wires and includes a No 2. Phillips
Semi-Automatic Vertical Bandsaws
Built to make longitudinal cuts, KASTOvertical allows users to saw square or flat
material with different cross sections from small rolled blocks or rolled plates.
System has a cutting depth of up to 680 mm and cutting height of 600 mm.
TOP OF THE NEWS
Drone Repair Kit
Portable Model TK 3300 Radio Con-
trol Tool Kit allows industrial drone
operators to make quick wiring re-
pairs to small UAVs in the field.
Hexapod for Ultra-Precise Apps
Boasting six-degrees of freedom
positioning with linear travel to 60
mm, HexGen hexapods target medi-
um-load, ultra-precision applications.
Pass-Through Wash System
Renegade I-Series system delivers
3-stage continuous cleaning efficiency to clean and dry complex,
multi-ported parts. Conveyorized
system reduces labor and increases
operational efficiency for real impact
on operation costs.
Service Line, Inc.
Extrusion Tooling System
Ideal for pressure and sleeving ap-
plications, Micro Medical extrusion
crosshead reaches precision con-
centricity of 0.008-in. or finer.
Guill Tool & Engineering
Portable Compressor System
Mobilair M125 compressor produces 405 cfm at 145 psig and features
Sigma Control Mobil for consistent
performance across a wide range
Kaeser Compressors, Inc.
These valves, featuring the Flexible Seal
Seat,; combine superior leak-tight control
and longer service life with easy, low cost
installation and maintenance. Ideal for integrated fluid circuits. Simply insert into drilled
hole and retain with mating parts. Kepner
Holding Device Kits available. Flows to 200
GPM. Pressure rated to 6,000 PSI: relief settings to 150 PSI.
For details visit: www.kepner.com
WHY CARR LANE
s Rod diameter 30% larger to eliminate
s Viton wiper is standard (metal wiper
s Exclusive safety clutch design available
to prevent damage to part, fixture, or
s Reinforced swivel mechanism with 2
or 3 helix paths depending on size for
s Up to 7500 psi maximum pressure for
more compact clamp design
s Position monitoring available, either
inductive or pneumatic via movable
s Over 1000 different standard sizes and
styles available with clamping forces
from 130 lb. to 8265 lb. stroke up to 2”
s Special stroke and clamping forces
available upon request.
Designed for 1,000,000 cycles
2,000,000+ cycles tested at full load
Fenton, MO 63026
Carr Lane Roemheld Mfg. Co.