Boring Rings Provide Uniform Pressure
compensate for “jaw lift” even in worn chucks
An 18-in. diameter boring ring
offers relatively light weight to
allow customers the same
ease boring out larger diameters as is had when forming
smaller diameters using the
smaller sized boring rings. These proven jaw rings provide
uniform pressure on all jaws for a consistent bore.
Dillon Manufacturing, Inc.
Display Gives Data from a Distance
manages output relays at the push of a few buttons
The DPM-100 digital
panel meter is a vibrantly
bright and large red LED
display that is visible in
bright sunlight, fog, dust,
or yards away. It is compatible with all Modbus-enabled sensors and can be programmed as a Modbus RTU master, slave, or snooper.
Durable Forming Mandrels
can operate up to 315°C continuously
PTFE Natural Grey Forming
Mandrels feature a smooth,
slippery surface that provides a 0.5 dynamic coeffcient of friction to prevent
sticking and the block tubing from shrinking, while
simplify catheter removal.
Applied Plastics Co., Inc.
Circle 316 on card or visit
WMS Cartonization Software
provides faster packaging turnaround
One of the newest additions to
the Datex warehouse management software
warehouse management feature
makes enhanced packaging decisions based upon business rules, order data, and SKU information. The WMS
cartonization software solution selects optimized packaging based upon the dimensions, weight, position, fragility,
and other factors of the products being shipped in order
to determine the optimal packaging for shipping. The
addition of the cartonization software module to Datex
FootPrint WMS is another enhancement designed to
maximize proftability by reducing waste and ineffciency.
Keypad Modules Offer Small Footprint
feature a 3 million cycle electrical life
TC Series is a self-contained sealed switch
module with up to 5
positions that can be
used in a grip, front
panel or hand held
device, and is especially useful in cursor
control or data entry
applications. The advantage of the TC module is that it incorporates keypad
functionality within a very small footprint, at slightly
over an inch in diameter. Standard or custom legends
are available and can be LED backlit. Standard termination options include fying leads, ribbon cable (with
or without AMP connector), and FFC (fexible fat cable).
Tested to three million cycles, the TC Series has an
operating/storage temperature range of -40º to 85ºC
and is sealed to IP68S.
OTTO Engineering, Inc.
Coolant Fastens Thread Turning Operations
supports the generation of high-quality threads
The CoroThread 266 thread turning tool provides
precision over and under-coolant to improve process
security and maximize effciency.
The addition of over-coolant improves chip formation
for more secure machining, while under-coolant controls the temperature for long and predictable tool life.
Precision coolant also has positive effects on surface
fnish, supporting the generation of high-quality threads.
Along with precision coolant, Coro Thread 266 features the proprietary iLock interface between the holder
and insert, which prevents cutting forces from causing
micromovements of the insert in the tip seat. For applications where long overhangs are unavoidable, the use
of dedicated, damped Silent Tools adapters provides a
proven way to reduce vibration and maintain precision.
Ideal for external and internal thread turning, a wide
standard assortment of insert thread profles with
dedicated grades and geometries are available for all
materials and applications.
Quick-change tool-holders with precision coolant
include Coromant Capto C3, C4, C5, and C6 for use
with 16 mm inserts as well as QS shanks in 20× 20
and 25× 25 mm sizes with 16 and 22 mm inserts. For
internal thread turning, a minimum hole diameter of
20 mm is required.