HIGH-CAPACITY TOOL LANYARDS
The latest additions to the Squids
line of dropped objects prevention
solutions are the highest weight-rated
tool lanyards to date, after being rigorously tested and third-party certified to
a 40-lb. maximum capacity. These tool
lanyards are built to withstand defined
weight limits, and made easy to use by
any worker to avoid accidentally dropping objects that could cause damage,
injuries, or possibly death.
The 40 lb. Tool Lanyard comes in two
models: 3129 Single Double-Locking
Carabiner w/ Swivel or 3139 Dual Double-Locking Carabiner w/ Swivel.
Made with non-shock absorbing
webbing, an extended length of 76
in. and two carabiner options, these
lanyards are specifically designed to be
attached to the structure being worked
on instead of the workers themselves.
CUT-RESISTANT GLOVES FOR
UltraTech coated gloves
come in two styles: UltraTech knit glove, UT2952 and
UltraTech Multi-task glove,
UT2953. The gloves are designed to provide precision
and protection for a variety
of job tasks such as agriculture, automotive, HVAC,
landscaping, salvage, and
shipping / receiving.
Both the knit glove and
the multi-task glove feature a 13-gauge salt and
pepper HPPE/synthetic shell
and foam nitrile coated palm and
fingers. The UT2953 glove has a padded palm
providing impact and vibration reduction. The exclusive TPR
design proves excellent coverage for back of hand protection
and the ID panel on the wrist allows for personalized identification of the user.
SPLICE CONNECTOR REDUCES EXPOSURE
TO LIVE WIRES
The Melni Crimpless Butt Splice Connector is revolutionizing the electrical industry by decreasing connector install
time and creating a safer environment for electrical workers. While traditional direct burial and submersible connectors require hydraulic tools, specialized dyes, shrink wraps,
and heat tools, all you need to install the Melni Butt Splice
Connector is prepped cable and a standard wrench. Installation can happen in less than a minute.
Simply insert stripped cable into the Melni Connector,
twist the end caps to tighten the patented spiral insert,
and tighten the waterproof caps. The time working with
live wires is greatly reduced along with exposure to open
flames and heat tools, making the installation area safer
for workers without sacrificing a reliable connection.
SAFE AND EFFICIENT TOOL CLAMPING
HAIMER Safe-Lock pull out protection system ensures safe cutting tool clamping. Special
drive keys in the tool holder perfectly match the spiral shaped grooves on the cutting tool
shank, thus creating frictional clamping forces and a positive locking form-fit. This effectively
prevents the cutting tool from pulling out of the tool holder. Furthermore, it increases the productivity through faster permissible speeds and increased tool life.
The Safe-Lock principle can be explained as follows: spiral-shaped grooves are ground into
the cutting tool shank, which have the same angle inside the tool. In combination with special
EDM form closed drive keys in the tool holder (shrink fit chucks, collet chucks or hydraulic
chucks) the grooves prevent the cutting tool from twisting or being pulled out of the chuck
during extreme machining, which causes very high costs when producing expensive work pieces. The combination of pull out protection and high runout accuracy leads to less vibrations and
very efficient metal removal rates. With this, it is possible to increase the metal removal rates
significantly by increasing the cutting depth and the feeds.