Pin Type Meters Verify Moisture Content
works with most hygroscopic building materials
The m100 Moisture Meter has a
compact, easy to carry design with
calibrations for wood and building materials. It comes in two models that
operate on the principle of electrical
resistance; they use the substrate as
an element in a circuit by driving two
pins into material being tested.
Resettable Fuses Extend Operating Currents
fuses feature a tighter hold to trip ratio
The MF-RG Series Multifuse Polymer
Positive Temperature Coeffcient Resettable Fuse product line has been expanded with eight new models. These
models extend the maximum operating
current of the series from 3 to 11 A,
and are a smaller size compared to the
existing through-hole Multifuse products.
Excavator Offers Increased Payload
can carry up to 2,300 lb. of payload
An addition to the X-Vac line, the X- 13
is similar to the X-Vac X- 8 in that it can
carry large payload for highway travel.
This increased payload capactity maximizes effciency on job sites. The X- 13
can carry up to 23,000 lb. of material,
allowing it to transport and dump debris
Circle 307 on card or visit www.nedinfo.com/66665-307
Personal Waterjet Cutter
5 HP pump generates 30,000 PSI
The release of the ProtoMAX abrasive
waterjet, a compact, self-installed cutting
system, offers a solution for prototyping
and relatively low volume cutting of almost any material under 2 in. thick.
The ProtoMAX brings all the versatility
benefts of large abrasive waterjet cutters in a sleek and economic package
that’s perfect for small job shops, engineering classrooms, makerspaces, and
personal use. It’s also a handy addition
for large shops and fabricators that need
occasional waterjet capabilities to complement their other cutting systems.
Though compact, it delivers 30,000
psi cutting power with a 5 HP pump and
can precision cut material under 2 in.
thick of almost any type, from metal to
composites, glass to granite, plastic to
wood, and more.