frequency drive for
the water and wastewater industries enhances system performance, simplifes
operation, and optimizes wire-to-water/
air effciency. It also
improves fow and
reliability in municipal pumping and aeration applications. Features, such as the soft pipe fll mode reduce water-hammer damage, while the quick-ramp
feature protects submersible pumps.
Inverter Rapidly Rotates Pallets
handles a load capacity of up to 4,400 lb.
Featuring a safe and easy way to invert a fully loaded
pallet without the need for labor intensive, time-consuming manual restacking, the PalletPal Rotator Inverter rotates loads a full 180-deg. in about 15 seconds. The PalletPal offers a load capacity of 4,400
lb. and accepts loads up to 48 x 48 x 48 in.
Southworth Products Corp.
Automated Tire Mold Cleaning System
directs the blast from four pressure nozzles
Featuring a precision nozzle manipulator with three
axes of movement, the automated tire mold cleaning system offers quick and non-destructive cleaning of both two-piece and segmented molds.
Tapping Arm for Large Diameters
The GH-60 hydraulic tapping
arm with capacity to 2 in.,
even in laser
cut holes, has a
reach from 20
to 85 in. and
operates at 55
or 275 RPM to
up to 811 ft/lb.
movement allows operators to easily position taps
with guaranteed perpendicularity.
Lightweight Pump Systems
provide flows up to 30 GPM
The SlimJim Electric Pump System, suited for land-flls and environmental remediation sites, requires
no separate control panel and features built-in auto
on/off start and run-dry protection. With a 4.5-in.
outer diameter, the pump is compact, easy to handle, and weighs only 22 lb.
Q.E.D Environmental Systems, Inc.
High Load, Low Profile Stage
features knobs for manual adjustments of each axis
stage is a low profle
stage measuring just
108 mm high with a
compact footprint of
458.5 x 458.5 mm.
The linear travel of
the X and Y axes is
170 x 170 mm, and the resolution of each axis is 20
microns or 1 micron ( 20 micro-steps per step motor
driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns. The XY stage’s table
measures 300 x 300 mm and features a precision
pattern of drilled and threaded mounting holes to facilitate the addition of tooling or fxtures.
6855 HERMOSA E
BUENA PARK, CALIF 2
Same Day Shipping on
Thousands of Parts
CALL US TODAY!
Quickly View Our Most Popular
Lines of Trims and Seals
IF YOU HAVE AN EDGE…
WE HAVE A TRIM!