Supercritical CO2 Extraction Pump System
can stall under pressure without damage
The e710 supercritical CO2 extraction pump system
addresses market demand for an environmentally
friendly extraction process used for a wide range of
natural oils, foods, and cannabis. The e710 pump
system is specifically designed for CO2 circulation
to recover 100% of the CO2 vapor when used with
recovery tank cooling. HiP’s patented pump/drive
technology is the industry’s first high pressure
electric pump system that does not require an air
compressor and uses an explosion-proof motor
rated for C1D1 areas. The system is designed
to process liquid condensation without damage
and to pull vacuum back through the pump when
evacuating a system.
High Pressure Equipment Company
Honeywell Forge for Industrial
benchmarks current data against expected data
Honeywell Forge for Industrial provides actionable recommendations,
highlighted with potential economic impact for
intelligent business and
operations. The portable
and extensible software
solution uses process
and asset digital twins,
role based, and comprehensive analytics to enable top to bottom, enterprise-wide visibility
to improve decision making and sustain overall performance of
the process, assets, people and safety.
Honeywell Process Solutions
Excavator Loads Trucks Faster
offers faster cycle times and improved performance
Fitted with an EPA Tier 4 Final certifed engine, the
PC2000-11 hydraulic excavator has more horsepower
and a new engine-pump control for faster cycle times
and improved multifunction performance.
The excavator is designed to load 70 to 200-ton rigid
frame haul trucks and is an excellent tool for stripping
overburden, loading coal, and loading shot rock.
With a simplifed power module (cooling package,
engine, PTO, and hydraulic pumps), accessibility
to major components is easier and reduces labor
hours when it comes time for planned overhaul.
KomVision, Komatsu’s all-around machine monitoring system comes standard on the PC2000-11.
To increase operator awareness of haul trucks and
light vehicles entering and leaving the working
area, the 7-camera system provides a full 360-deg.
bird’s-eye view of the working area on a dedicated
10.4-in. touch screen monitor.
Komatsu America Corp.
FROM THE COVER Versatile Shoulder Milling Cutter
has a soft cutting action making it ideal for difficult to cut materials
M4130, a shoulder milling cutter that reduces costs
through its ability to use Walter’s universal M4000 system, inserts in a variety of different applications. It’s
soft cutting action makes the M4130 shoulder milling
cutter ideal for roughing operations involving steel, cast
iron, stainless steels, and materials with diffcult cutting
properties. This addition is also capable of plunge milling,
ramping, pocket milling, and circular interpolation milling.
The M4130’s inserts, with rhombic basic shape and a
15° clearance angle, can be used either in the routing
cutters or helical milling cutters of the M4000 family.
The double-edged inserts with sintered circumference
are available in three sizes, each with four CVD-coated
and three PVD-coated grades, making it relevant for any
Walter USA, LLC
Portable Volumetric Feeder
pre-cut with forklift slots to facilitate transport
feeder enables rapid
installation of a treatment process dosing
system wherever and
whenever it is needed. For automated
additive dosing and
monitoring with consistent feed rates, the
feeder is an automatic, full-featured volumetric feeding system for
adding dry polymers to water, wastewater, and
chemical processing applications.
Scaletron Industries, Ltd.
Compact Linear Stage
provides high speed and 10nm resolution
The U-723 XY
per axis, with
a footprint of
only 42 x 42
mm. Its low
profle of 21
mm and miniaturized design allows for easy integration into
tight spaces. In addition to high resolution ( 10
nanometer linear encoders) it provides high
speed motion up to 200 mm/sec and rapid step/