SINUMERIK Run MyRobot/Direct Control allows
users to integrate the mechanic robot model in the
SINUMERIK CNC. As a result, no additional robot controller is required. The direct control concept signifcantly
simplifes the confguration of the controller hardware
and optimizes the spare parts management process.
The solution allows the CNC to control the robot arm
and contains safety functions typically performed by the
robot controller. In addition, the robot is programmed
entirely on the Sinumerik CNC operator panel.
The technology provides further improvements
regarding accuracy and dynamics, together with the
benefts arising from a single-source controller concept.
It also reduces the time and expenditure required for
commissioning and engineering tasks.
The major difference between the DirectControl technology and conventional solutions is that DirectControl
performs all the functions previously assigned to the
robot control system. In addition, Run MyRobot/Direct-Control not only enables a more dynamic application
of the robot but also provides more accurate control
and improves capacity for robot operations to run simultaneously with machining time.
Stand-Alone Lump Breaker
withstands heavy use and is easy to maintain
Unlike units permanently
installed between upstream
and downstream equipment, the self-standing
De-Clumper Lump Breaker
(model RDC-1530-SS) can
be fed from a variety of upstream sources including
handheld containers and
can straddle downstream
equipment, drums, boxes or
mobile bins for processing, storage or packaging. The
unit de-lumps bulk materials that have agglomerated or solidifed during storage or shipment, returning
products to their original particle sizes and fowability.
Hot Tap Digital Flowmeters allow installation when compressed air piping is under pressure. The meters incorporate two valves that the measuring probes pass through
while a sound muffer collects chips to eliminate debris
from entering the airstream. By eliminating the need to
isolate and remove pressure from the pipe, these fow-meters reduce installation time while maintaining safety.
High-End Metal Analyzer
gives highly accurate results in under 20 seconds
SPECTROLAB S high-performance arc/spark OES analyzer for the analysis of metal in process control represents a
real revolution in high-end OES metal analysis; It features
SPECTRO’s proprietary CMOS+T technology and delivers
the fastest measurements, lowest limits of detection, lon-gest uptime, and most future-proof fexibility in its class.
SPECTRO Analytical Instruments
Large Inventory Assembly Carts
hold two hours’ worth of parts
Designed to handle
the movement of sequenced production
parts for an automotive OEM, Creform’s
latest assembly cart
brackets to ward off
damage and to provide part protection to increase the effciency of parts
handling and safety throughout the assembly operation. The cart features two levels, each with four distinct
compartments. The slots are open at either end for easy
load/unload, while each level features a half-inch plastic
shelf that is divided into the four compartments.
Contact Us Today!
Experts in Plastic and Rubber
PEEL & STICK
nedinfo.com/73500-74 74 CIRCLE