Flexible and adaptable, the Pre-Compensated Valve Platform makes it easierfor mobile machine builders to combine a range of hydraulic control valves intoa single, integrated, multifunctional control solution to match specific requirements. All the valves in the platform support pre-compensated load-sensing toensure that the proper hydraulic flow is delivered to each function, independent of the overall loads on the hydraulic systems.
Hydra-Cell Seal-less Pumps LACT unitsseparate the hydraulic end from the fluid end,so there are no seals or packing to leak, wear, adjust or replace. The pumpscan handle sand or other solids up to 800 microns in size without fine filtrationwhile also being able to pump water-thin fluids without having to adjust thepump speed. Four models are available with maximum flow rates ranging from1,251 to 5,383 barrels per day and discharge pressures from 700 to 2,100 psi.Wanner Engineering, Inc.
MORE ONLINE: nedinfo.com/80229-33
High-Pressure Solenoid Valves
Supporting OEMs’ need to develop more compact machines and equipment without compromising on fluid control performance, the ASCO Series 256/356 provides a smaller footprint, reduced power consumption, and increased pressure ratings. The valves are dust-tight,IP67-rated, can be submerged in up to one meter of water, and provide multiple end-connec-tor options and flexible electrical connections for easy installation.
Emerson Electric Co.
Prevent Damage With Tapered Plugs
The T Series Tapered Plug Caps are dual-function closures that can be used asa cap for hydraulic fittings, tube end caps, pipe caps or as a plug for threadedholes, fittings or ports. The FC Series Flanged Caps are designed to protectthreads, components or fittings with many diameters and extended lengths.Additionally, the OP Series Outside Pull Tapered Plugs provide a snug fit witheasy removal due to the tapered design and an offset pull-tab.
Electronic Flow Controllers
The Cordis flow controller uses a fast-reacting mems technology sensor upstream from a proportional valve, with the option of a DR- 2 regulator for accurate and precise pressure control in a small package. The Cordis requires lessthan one minute to warm up, has a pressure drop of 14 in. H2O, and featuresflow ranges as low as 0 to 3 0 sccm. Standard control options include 0.2 to 10VDC, 4.32 to 20 mA, and 3. 3 VDC serial.